Vitalcare 506DN3, Руководство по обслуживанию

Страница: 60 / 254

Section 4 —Cleaning and Disinfecting
Page 4-4 VitalCare
TM
506N3 Series Service Manual Criticare Systems, Inc.
EAR CLIP
• To avoid damage to the Dura-Y sensor, remove the sensor from
the ear clip before cleaning either piece. To clean the sensor,
refer to the instructions in the Dura-Y sensor Directions for Use.
• Do not sterilize the ear clip by irradiation, steam, or ethylene
oxide.
The ear clip may be cleaned by wiping or soaking it (for 10 minutes)
in isopropyl alcohol (70%). If the ear clip is soaked, be sure to rinse it
with water and air dry it prior to use on the next patient.
After each cleaning and prior to use again, the ear clip should be
inspected for cracking or breakage, and discarded if any defects are
noted.
Discard if loss of spring tension allows slippage or movement of the
ear clip from its proper position on the ear lobe or pinna. Slippage
caused by loss of spring tension may result in inaccurate sensor
readings.
Temperature Probes
To clean the probe tip, use a damp cloth with diluted detergent.
CAUTION
! !