Vitalcare 506DN3, Руководство по обслуживанию

Страница: 43 / 254

Criticare Systems, Inc. VitalCare
TM
506N3 Series Service Manual Page 2-11
Section 2 —Service Menus
Power up in Service Mode
The monitor needs to be powered up in the Service mode. To power
up the monitor in Service mode:
1. Power off the monitor.
2. While holding the DOWN arrow key, press the ON/OFF (Power)
key.
3. Continue holding the DOWN arrow key until SERVICE DISPLAY
appears in the top line of the LCD display.
Figure 2-1: SERVICE DISPLAY Message
BOARD SETUPS
1. Press the DOWN arrow key until BOARD SETUPS appears in
the second line of the LCD display.
Figure 2-2: BOARD SETUPS Menu
2. Press the MENU key to enter the BOARD SETUPS menu.
3. Verify that the board setups are correct for this monitor.
4. Press and hold the MENU key to exit the BOARD SETUPS
menu.
Saving Unit Defaults
CONFIGURATION DEFAULTS
1. Press the DOWN arrow key until DEFAULT SETUPS appears in
the second line of the LCD display.
2. Press the MENU key to access the DEFAULT SETUPS menu.
3. Press the DOWN arrow key until CONFIG DEF (configure
defaults) option appears in the second line of the LCD display.
4. Press the MENU key to change the default. The arrow in that
display line should point to the right.
5. Press the UP or DOWN arrow keys until USer appears.
Board Configuration Setting
SpO2 CSI DOX DOX
Nellcor NCOR
No SpO2 NONE
NIBP CSI Comfort Cuff 1020
No NIBP NONE
TEMP FasTemp FSTMP
TurboTemp TURBO
No Temperature NONE
SERVICE DISPLAY
REVISIONS
SERVICE DISPLAY
BOARD SETUPS