Vitalcare 506DN3, Руководство по обслуживанию

Страница: 94 / 254

Section 6 —Service Testing & Calibration
Page 6-4 VitalCare
TM
506N3 Series Service Manual Criticare Systems, Inc.
DOX SpO
2
Performance Testing
This test requires a SmartSat Pulse Oximetry Analyzer, Model SS-
100A. The SmartSat is a programmable simulator and probe
analyzer. The SmartSat is the recommended device for testing the
DOX SpO
2
module. The SmartSat, model SS-100A, is available from
Clinical Dynamics Corp. of Wallingford, CT.
The SmartSat comes standard with a Lemo style connection. The
Cat. No. 913A adapter that converts Lemo to DB-9 style SpO
2
connections is needed for the 506N3 Series monitor. The analyzer
also has a custom port designed for testing DOX™ SpO
2
sensors.
Programming the
SmartSat Analyzer
The SmartSat can be used for spot checking SpO
2
values using the
manual settings. The manufacturer recommends using a timed and
programmed sequence to ensure that there is optimal performance.
Auto Seq: Model 506N3 Oximeter DOX
Level SPO2 Limits Heart rate Limits
Test Procedure
1. Verify the SpO
2
module as described in “SpO
2
Verification: CSI
DOX Only” in Section 5.
2. Attach the monitor to the SmartSat.
3. Start the SmartSat programmed sequence: SmartSat Auto
Sequence . Verify that the monitor’s reported SpO
2
values are
within the limits specified.
Level Saturation Limits Heart Rate Limits
(%) (%) (bpm) (bpm)
1 98 97 - 99 40 39-41
2 96 94 – 98 60 59-61
3 90 88 – 92 80 79-81
4 78 76 – 80 100 99-101
5 61 58 – 64 120 119-121
6 52 49 – 55 180 179-181
7 40 37 – 43 300 297-303
4. Even if the monitor fails only one level, rerun the sequence after
30 seconds. Only if the monitor is successful the second time,
do you pass the monitor.
5. If the monitor fails again, contact the Criticare Service
Department.