Vitalcare 506DN3, Руководство по обслуживанию

Страница: 34 / 254

Section 2 —Service Menus
Page 2-2 VitalCare
TM
506N3 Series Service Manual Criticare Systems, Inc.
Secondary Service
Displays
Pressing the MENU key once within a primary service menu item
accesses the secondary service menu item(s).
With the exception of the REVISIONS service item, an arrow (<--)
points at the secondary service menu item to designate that the user
is in this mode. Press UP and DOWN arrow keys to scroll through
secondary service menu items.
Press the MENU key to choose the desired secondary service menu.
This toggles the arrow to point the other way {-->} and moves to the
value selection.
Hold the MENU key to return to the primary service menu item.
Service Display List
The following is a list of service primary and secondary menu items
follows and each default and description/values.
Primary Menu Secondary Menu Default Description
REVISIONS 506N3_SERIES N/A Model series
Revision nn.nn N/A Main software revision nn.nn is alphanumeric
revision identifier – decimal point may vary
MMM DD YYYY N/A Main software revision date
S/N: nnnnnnnnn N/A Monitor serial number
APP. CS. : nnnn N/A Main software checksum
SpO
2
XXXXX nn.nn N/A SpO
2
module revision where XXXXX is a three to
five character name for the type of SpO
2
module;
nn.nn is alphanumeric revision identifier – decimal
point may vary.
SpO
2
NOT SENT N/A SpO
2
module did not send software revision
information. This message displays if no module
is present.
NIBP XXXXX nn.nn N/A NIBP module revision where XXXXX is a three to
five character name for the type of NIBP module;
nn.nn is alphanumeric revision identifier – decimal
point may vary.
NIBP NOT SENT N/A NIBP module did not send software revision
information. This message displays if no module
is present.
TEMP XXXXX nn.nn N/A Temperature module revision where XXXXX is a
three to five character name of the type of
temperature module;
nn.nn is alphanumeric
revision identifier – decimal point may vary.
TEMP NOT SENT N/A Temperature module did not send software
revision information. This message displays if no
module is present.
NOTE : When entering Revisions, if accessed to quickly some
revisions may not show. Wait 5-10 seconds before entering to allow
the processor to acknowledge the revisions. If a revision does not
show, either that module is not present in the device or the processor
is not functioning correctly.