Vislink Strata RX, Техническое справочное руководство

Страница: 30 / 186

Routine Operation 3-2
Strata RX
Operator’s Guide/Tech Ref Manual
3.2.2 Status LED
Above the Power Switch on both the RCU and RXU is a multi-
color Status LED. The LED indications are as follows:
CAUTION
A
Major Alarm
may also indicate a
potential safety hazard. Shut down the RX
System and disconnect power.
3.2.3 Alphanumeric Display
The RXU and RCU each have a two-line by 12-character
alphanumeric display. The display works in concert with the
Control Switch to allow you to monitor system status, and to
control system settings.
See Figure 3-2 on page 3-5.
LED Color Meaning
----- Power is not on in that unit.
Green Power is on and no errors are detected.
Amber
Minor Alarm
- Power is on but some part of the
system reports an abnormal condition that might
impair performance.
Red
Major Alarm
- Power is on but there is a failure
or error that prevents normal operation.
3.2.4 Control Switch
Routine operating settings are controlled by the Control Switch.
See Figure 3-2 on page 3-5.
Turning the Control Switch right or left displays status and
settings, and pushing it in makes selections, as described below:
Turning
the Control Switch to the
right
displays the
Monitor
Screens.
These provide current
status
of the RX System,
including:
• band and frequency settings
• signal quality
• demodulation settings
• error codes.
Turning
the Control Switch to the
left
displays the
Command
Screens.
These allow
control
of the RX System, including:
• selected Preset
• channel and offset
• IF filter