Vislink Strata RX, Техническое справочное руководство

Страница: 20 / 186

Product Description 2-6
Strata RX
Operator’s Guide/Tech Ref Manual
If your RXU is not equipped with a demodulator, this connector is
replaced by a blank panel.
Monitor (MON.) Connector
If your RXU or RCU has COFDM/MPEG installed, this rear panel
output can be configured (when operating in digital mode) to
provide either:
• 70 MHz IF
• ASI (output of COFDM demodulator, before MPEG
decoding)
If your RXU or RCU is equipped with an analog demodulator, this
connector provides only the 70MHz IF signal.
If your RXU is not equipped with a demodulator, this connector is
present but not functional.
GEN LOCK Connector
If your RXU or RCU has COFDM/MPEG installed, this rear panel
input allows you to supply an external synchronization signal
(400 mV p-p nominal) to the MPEG decoder. The RX System
must be configured to use this signal using the RX configurator
software.
If the System is configured to accept a GEN LOCK signal and
none is present, the MPEG decoder will automatically supply an
internal synchronization signal.
If your RXU or RCU is not equipped with COFDM/MPEG, this
connector is replaced by a blank panel.
2.5 Typical System Configurations
The figures that follow provide a number of typical configurations
for RX Systems. The illustrations are arranged in the same order
as the descriptions in Section 2.2 on page 2-1.