Viega RABS 1250.7US, Руководство по установке

Страница: 61 / 104

61 IM-HC 599871 0321 RABS
Software Set-Up Procedures
5.3.3 Temperature Reduction Mode
Ä
6.1.9 “Leaving Home Mode Menu” on page 79
Temperature reduction mode is indicated by the icon shown in the target
temperature display visible in the picture on the left.
The user has enabled go-away mode — set temperature profiles are
deactivated, room temperatures are reduced.
5.3.4 Fault Indication
An illuminated red LED indicates a fault.
Ä
6.1.22 “Central Settings / Fault Menu” on page 90.
5.4 Method 4
–
Remote Operation via Software
You can operate several control units simultaneously via Internet
connection — also when you’re away from home. For this, the control
units in question must be connected to the router either via LAN cable
(
Ä
5.4.2 “Connecting the Control Unit via LAN” on page 64) or WLAN.
Prerequisite:
„
The steps for configuration level 3 have been completed
successfully.
5.4.1 Connecting the Control Unit via WLAN
To connect a control unit to your router, first use your WLAN-capable
end device to establish a peer-to-peer connection to the WLAN module
of the control unit; next, configure the connection to the router in the
settings of the operation software.
X Open the WLAN network overview at the end device.