Viega RABS 1250.7US, Руководство по установке

Страница: 53 / 104

53 IM-HC 599871 0321 RABS
Hardware Set-Up Procedures
4.4.3 Checking the Radio Connection Radio Amplifier / Control Unit
For the range test, the range extender must be logged in with the control
unit.
Checking signal strength:
1 - Button “connect”
2 - Button “ok”
X
Briefly press the “connect” button on the thermostat and the “ok”
button on the range extender simultaneously.
Z
The signal strength “0”, “1” or “2” is indicated on the display of
the range extender.
Z The LED “connect” at the control unit emits red light, interrupted
by two flashes.
4.4.4 Checking the Radio Connection of the Thermostat / Radio Amplifier
For the range test, the thermostat must be logged in to the range
extender.
Checking signal strength:
1 - Button “+”
2 - Button “-”
X Room thermostat: Press the “+” and “-” buttons simultaneously.
Z
The signal strength “0”, “1” or “2” is indicated on the display.
4.5 Thermostat Operation
4.5.1 Setting the Room Temperature
1 - Button “+”
2 - Button “-”
3 - LEDs
Set the desired room temperature (target temperature) at the thermostat
using the buttons “+” and “-”.
1
2
1
2
1
2
3