Vertical summit Скачать руководство пользователя страница 310

Страница: 310 / 440

Summit & Summit 800

Feature Description and Operation Manual

Issue 1.2

299

“5” => FS: Feature server

“6” => MS: SMS message wait.

3. Press the

[VOL UP]

[VOL DOWN]

button to scroll through the Station Messages.

MSG : 100

To return a call for the current Station Message

1. Press the

[HOLD/SAVE]

button.

To delete the first Message Wait from the list

1. Press the “*” button, the list is updated removing the message from the list.

To delete all waiting Messages

1. Press the

[SPEED]

button.

2. Press the “*” button twice.

SLT

To leave a Message Wait, while receiving ring back tone or no response on a call announce

1. Momentarily press the hook switch.

2. Dial “556”, the Message Wait/Call Back code.

3. Hang up, Message Wait is activated.

To leave a Message Wait, while receiving DND tone

1. Momentarily press the hook switch.

2. Dial “556”, the Message Wait/Call Back code.

3. Hang up, Message Wait activated.

To retrieve a Station Message Wait;

1. Dial “557”, the Message Wait/Call Back Answer code.

To leave a Call Back (queue for a station), while receiving busy

1. Momentarily press the hook switch.

2. Dial “556”, the Message Wait/Call Back code.

3. Hang up, Call Back is activated.

To respond to a Call back recall, when the busy station is available the system calls back,

1. Lift the handset.

2. Previously busy station is called.

Conditions

1. A Message Wait/Call Back return call will always ring at the receiving station overriding

the Intercom signaling mode selected.

2. A station can leave only one callback request.
3. The

[MESSAGE/CALL BACK]

button LED will continue to flash until all Message Wait

and Call Back requests, including Voice Mails, have been serviced.

Содержание summit

























































































































































































































































































































































































































































Результаты поиска

Содержание summit

Отзывы:

Бренды по названию

Популярные бренды

Vertical summit, Руководство по эксплуатации

Результаты поиска

Содержание summit

Отзывы:

Бренды по названию

Популярные бренды