Summit & Summit 800
Feature Description and Operation Manual
Issue 1.2
127
2.42
Headset Compatibility
Description
You can use an industry standard headset with iPECS IP and LDP Phones in place of or in
addition to the handset. The station is programmed for Headset operation.
In the Headset mode, pressing the
[SPEAKER]
button will send audio to the Headset instead of
the speakerphone. In addition, when in the Headset mode, ring signals can be delivered to the
speaker or the headset as defined in the system database.
As an iPECS IP or LDP Phone users, you may assign a Flex button to select Headset or
Speakerphone operation. The
{HEADSET SELECT}
button may be used to toggle the operation
of the phone between Headset and Speakerphone.
Operation
iPECS IP & LDP Phones
To assign a Flex button for {HEADSET SELECT}
[TRANS/PGM]
+
{FLEX}
+
[TRANS/PGM]
+ “61” +
[HOLD/SAVE]
To change operation from Speakerphone to Headset
1. Press the
[TRANS/PGM]
button.
2. Dial “61”, the Headset select code.
3. Dial “0” to select Headset, “1” to select Speakerphone.
Or,
Press the
{HEADSET SELECT}
button.
To change the device to receive ring signals
1. Press the
[TRANS/PGM]
button.
2. Dial “62”, the Ring select code.
3. Dial “1” for Speaker, “2” for Headset or “3” for both.
To place/answer calls using the headset
1. Press the
[SPEAKER]
button with the phone in Headset mode.
Conditions
1. The Intercom Signaling Mode can be set in the Headset mode as with the
Speakerphone mode.
2. The station always receives Page announcements over the speaker of iPECS IP and
LDP Phones.
3. Although the phone is in the Headset mode, the system will monitor the hook-switch
status. If the user lifts the handset to go off-hook, audio is delivered to the handset.
4. If you are using a LIP-8012D, 8024D or 8040L phone in the Headset mode, the
{SPEAKER}
Soft button is available during an active call. You can switch to the
