Summit & Summit 800
Feature Description and Operation Manual
Issue 1.2
4
2.2 Account Code
Description
You may allow tracking of specific calls by entering a non-verified variable length (up to 12 digits)
identifier for a call. The identifier or “Account Code” is output as part of the Station Message
Detail Record (SMDR) for the call as discussed in Section 2.75. This is often used to allocate
call costs to a specific account or client.
Operation
iPECS IP & LDP Phones
To assign a Flex button for {ACCOUNT CODE} operation:
[TRANS/PGM]
+
{FLEX}
+
[TRANS/PGM]
+ “84” +
[HOLD/SAVE]
To assign a Flex button for {ONE-TOUCH ACCOUNT CODE} operation:
[TRANS/PGM]
+
{FLEX}
+
[TRANS/PGM]
+ “84” + Account code (up to 12 digits) +
[HOLD/SAVE]
To enter an Account Code using an {ACCOUNT CODE} button prior to placing a call:
1. Lift the handset.
2. Press the
{ACCOUNT CODE}
button.
3. Dial the Account Code (up to 12 digits).
4. Press “*”, Intercom dial tone is heard.
5. Place the outside call as normal.
Or,
1. Lift the handset or press the
[SPEAKER]
button.
2. Press the
{ONE-TOUCH ACCOUNT CODE}
button.
3. Place the outside call as normal.
To enter an Account Code using an {ACCOUNT CODE} button during a call:
1. Press the
{ACCOUNT CODE}
button.
2. Dial the Account Code (up to 12 digits).
3. Press “*”.
Or,
Press the
{ONE-TOUCH ACCOUNT CODE}
button.
SLT
To enter an Account Code prior to placing a call:
1. Lift the handset.
2. Dial the Flex Numbering Plan code “550”.
3. Dial the Account Code (up to 12 digits).
