VERDER CARBOLITE GERO 3016, Инструкции по установке, эксплуатации и обслуживанию

Страница: 38 / 56

w.actn
Watchdog Action
l
mAn
- The Watchdog flag must be cleared manually
l
Auto
- The Watchdog flag will clear automatically
Note: Also adjustable at Operator Level 3.
W.RCOV
Watchdog
Recovery
Only displayed when
W.ACTN
is set to
Auto
.
The Watchdog Recovery is a timer that determines the
delay before the Watchdog Flag is cleared after the
reception of valid messages resumes.
A value of
0
will reset the Watchdog Flag when the first
valid messageis received. All other values will require a
minimum of 2 valid messages to be received.
w.flag
Watchdog Flag
l
On
- The communications have stopped addressing the
controller longer than the
W.TIM
E value
l
Off
- Communications are being received normally..
t.fmt
Time Formation
Used to set the resolution of time parameters on the
communications port when read/written via scaled integer
comms.
l
mSEC
- Milliseconds
l
SeC
- Seconds
l
mIN
- Minutes
l
HOur
- Hours
Note: Also adjustable at Operator Level 3.
Nwrk
Sublist:
IP.A1
IP Address
1st byte of the IP Address: XXX.xxx.xxx.xxx. Default: 192
IP.A2
IP Address 2 2nd byte of the IP Address: xxx.XXX.xxx.xxx. Default: 168
IP.A3
IP Address 3 3rd byte of the IP Address: xxx.xxx.XXX.xxx. Default: 111
IP.A4
IP Address 4 4th byte of the IP Address: xxx.xxx.xxx.XXX. Default: 222
ip.s1
Subnet Mask
1st byte of the Subnet Mask: XXX.xxx.xxx.xxx. Default: 255
ip.s2
Subnet Mask 2
2nd byte of the Subnet Mask: xxx.XXX.xxx.xxx. Default:
255
ip.s3
Subnet Mask 3
3rd byte of the Subnet Mask: xxx.xxx.XXX.xxx. Default:
255
ip.s4
Subnet Mask 4
4th byte of the Subnet Mask: xxx.xxx.xxx.XXX. Default: 0
ip.g1
Default Gateway
1st byte of the Default Gateway: XXX.xxx.xxx.xxx. Default:
0
ip.g2
Default Gateway
2
2nd byte of the Default Gateway: xxx.XXX.xxx.xxx. Default:
0
ip.g3
Default Gateway
3
3rd byte of the Default Gateway: xxx.xxx.XXX.xxx. Default:
0
38