Veichi SD500 Series, Руководство пользователя

Страница: 7 / 108

SD500 Spindle Servo Drive Manual
4
1.2.2 Motor Naming Rules
CM 2 S-1560 D 004-U2 28 N 3 Y
Spindle motor series
Base
A:130;0:165;
1:180;2:200;
4:265;6:360 ；
Body length
S,M,L,H,E,F
Reference speed
1560
：
1500rpm
Rated voltage
D ： 380V
Rated power
004:4kW; 5R5:5.5kW; 7R5:7.5kW; 011:11kW;
015:15kw; 018:18.5kW; 022:22kW; 030:30kW; 037:37kW
Motor shaft
diameter
28:28mm
38:38mm
Shaft structure
K:motor shaft with
flat key
N
：
motor shaft
without flat key
Installation
method
3:horizontal
5:vertical
7:horizontal-
vertical
Max. speed
60 ： 6000rpm
Encoder type
U0:no encoder
U1:incremental 1024 lines
U2: incremental 2500 lines
Z1:sine-cosine 1024 lines
Temperature
sensor
Empty:none
Y:KTY;
C:PTC;
Figure 1-3
1.3 Technical Specification
Item Description
Power input
Voltage & frequency Three-phase:380V~440V, 50/60Hz
Allowable fluctuation
Voltage imbalance rate:<3%; frequency: ±5%; distortion rate in
accordance with IEC61800-2
Closing surge current Lower than rated current
Power factor ≥0.94 (with DC reactor)
Spindle drive efficiency ≥96%
Output
Output voltage
Output under rated conditions: three-phase 380 to 440V, error less than
5%
Output speed range 4-pole motor 0~18000rpm; 0~600Hz
Main control
performance
Motor control mode Sine wave PWM modulation, fully closed-loop vector control
Speed control range 1:1000
Steady-state speed accuracy ≤0.05% rated synchr onous speed
Starting torque 200% rated torque at 0Hz
Torque response ＜ 10ms
Speed control accuracy ±0.2%
Position control accuracy ±1pulse
Overload capacity 200% rated current for 20S
Input/output
interface
Digital input 7-way optocoupler isolated input, input method NPN or PNP optional
Digital output 2-way optocoupler isolated output
Analog input 2-way: -10V to +10V, 0 to 10V, 0 to 20mA selectable
Analog output 1-way:0~10V 、 0~20mA Optional
Relay output 2-way: two sets of normally open and normally closed contacts
Encoder input interface 2-way: motor encoder 1 way; spindle encoder 1 way
Encoder output interface 1-way: crossover output
Pulse input interface 1-way: orthogonal pulse/dir pulse/CW+CCW
Bus interface None