Veichi SD500 Series, Руководство пользователя

Страница: 53 / 108

SD500 Spindle Servo Drive Manual
50
(0x0636) when sending CP1 0: Continue running (digital terminal output only)
1: Report a warning and free stop
2: Report a warning and continue running
3: Forced stop
(0~3)
F06.55
(0x0637)
Comparator 2
monitoring selection
V/F SVC FVC PMVF PMSVC PMFVC
Ones-and tens- bit: set value 00~63 for yy in the monitoring
parameter number Cxx.yy.
Hundreds- and thousands-bit: Set value 00~07 for xx in
monitoring parameter number Cxx.yy.
0002
(0000~0763)
RUN
F06.56
(0x0638)
Comparator 2 upper
limit
V/F SVC FVC PMVF PMSVC PMFVC
Set the comparator 2 upper limit value.
30
(0~65535)
RUN
F06.57
(0x0639)
Comparator 2 lower
limit
V/F SVC FVC PMVF PMSVC PMFVC
Set the comparator 2 lower limit value.
0
(0~65535)
RUN
F06.58
(0x063A)
Comparator 2 bias
V/F SVC FVC PMVF PMSVC PMFVC
Set the comparator 2 bias value.
0
(0~1000)
RUN
F06.59
(0x063B)
Action selection
when sending CP2
V/F SVC FVC PMVF PMSVC PMFVC
0: Continue running (digital terminal output only)
1: Report a warning and free stop
2: Report a warning and continue running
3: Forced stop
0
(0~3)
RUN
Table 4-25
 Group F06.6x: Virtual input/output terminals
Parameter code
(Address)
Designation Content
Default
(Setting range)
Adjustable
properties
F06.60
(0x063C)
Virtual vX1 terminal
function selection
V/F SVC FVC PMVF PMSVC PMFVC
See terminal X functions.
0
(0~63)
RUN
F06.61
(0x063D)
RUN
Virtual vX2 terminal
function selection
V/F SVC FVC PMVF PMSVC PMFVC
See terminal X functions.
0
(0~63)
RUN
F06.62
(0x063E)
Virtual vX3 terminal
function selection
V/F SVC FVC PMVF PMSVC PMFVC
See terminal X functions.
0
(0~63)
RUN
F06.63
(0x063F)
Virtual vX4 terminal
function selection
V/F SVC FVC PMVF PMSVC PMFVC
See terminal X functions.
0
(0~63)
RUN