Vega FiberFlex LFXG-H, Руководство по эксплуатации

Страница: 92 / 102

Diagnostics and repair
90 LFXG-H Installation and Operation Guide
Recording the source wipe and shutter check
You can use the gauge’s diagnostic alarms to remind you when a source
wipe and shutter check are due. If you do, you must record the source wipes
and shutter checks in the software to acknowledge the alarm and reset the
timer.
Perform this procedure after a source wipe or a shutter check.
Procedure 5.1: To record a source wipe or shutter check
Procedure 5.2: To change the due date of source wipe or shutter
check
Field repair procedures
Very few parts are field repairable, but you can replace entire assemblies or
boards. These parts are replaceable:
• CPU circuit board
Note: See the Radiation Safety for U.S. General and Specific
Licensees, Canadian and International Users Manual and
the Radiation Safety Manual Addendum of Reference
Information CD that came with the source holder and the
appropriate current regulations for details.
1. Select Setup | Source Functions .
2. Click Record Wipe or Record Shutter Check .
1. Select Setup | Source functions .
2. Change the number of days in the Wipe Interval or Shutter Check
Interval field.
3. Click OK .