manualshive.com logo in svg

VBrick 9000 Series, Руководство администратора

Поделиться
Скачать
VBrick 9000 Series Скачать руководство пользователя страница 24

16

© 2015 VBrick Systems, Inc.

Domain Name Server Settings

To access the 

Domain Name Server 

fields:

1. Navigate to 

System Configuration

 > 

Network

 > 

Domain Name Server

 section.

Network Page Topics:

Network

Domain Name Server Settings

Network Time Synchronization Settings

External FTP Server Settings

Network Time Synchronization Settings

To access the 

Network Time Synchronization 

fields:

1. Navigate to 

System Configuration

 > 

Network

 > 

Network Time Synchronization 

section.

These fields are used to synchronize network time using the host name or IP address of a 
known server to provide a synchronized time for all encoders in the network. Note that 
Network Time Synchronization is disabled by default and will auto reboot the unit if enabled. 
If enabled, and the NTP time is four minutes greater than or less than the current system 
time, the unit will reboot twice. 

Field

Description

Primary Server IP Address

This is the primary server used for DNS.

Secondary Server IP Address This is the secondary server used for DNS.

Default Domain Extension

This is the domain name used for DNS.

Field

Description

Network Time Protocol

Check to enable network time synchronization. Default = 
Disabled. 

Содержание 9000 Series

































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды