VBrick 9000 Series, Руководство администратора

Страница: 102 / 192

94 © 2015 VBrick Systems, Inc.
Auto Unicast Transmitter Mode

To enable
Auto Unicast
on the
Transmitters
page:
1. Navigate to
Encoder Configuration
>
Transmitters
.
2. Select a mode for the
Auto Unicast Mode
field. Note: You must also have
RTP
selected as
a
Transport Type
on the Streams page before the
Auto Unicast
fields will appear.
3. Complete the remaining
Auto Unicast
fields that appear as needed.
Auto Unicast Mode
is a transmitter mode that allows the VBrick encoder to "automatically"
establish and maintain a connection with a streaming server like Quicktime or Darwin. The
stream is pushed to a configured publishing point location on an external server to which
external clients can connect to retrieve the stream. For example, you can place a VBrick
encoder inside a private network and configure it to
Auto Unicast
to a server on the outside
Internet. External clients will then connect to this server via the Internet. Auto Unicast uses
RTSP to control the session. It establishes a connection with the streaming server, negotiates
media types and ports, and begins streaming to the server. Once established, the encoder will
push this stream to the server until the session is terminated (typically by disabling the
transmitter).
Field Description
Auto Unicast Mode • Disabled – Auto Unicast is disabled.
• Auto Unicast (UDP) – Push streams to server via UDP.
• Auto Unicast (TCP) – Push streams to server via TCP.
Auto Unicast Dest Port Port used for TCP RTSP control connection to streaming
server.
Auto Unicast Dest Pub Point
Name Destination publishing point name on streaming server, for
example:
<server_ip_addr>:<port>/<publishing_point_name>
Auto Unicast Dest Username User name for authentication on streaming server.
Auto Unicast Dest Password Password for authentication on streaming server.