VBrick 9000 Series, Руководство администратора

Страница: 99 / 192

Encoder Configuration
VBrick 9000 Encoder Admin Guide 91
Destination Select IP Address or Host Name from the dropdown. The
actual IP address determines whether the stream will be
multicast (e.g. 239.22.118.72) or unicast (e.g. 127.22.118.72).
Default = 127.0.0.1 (loopback). For guidance on selecting
multicast address, see the Getting Started Guide >
Assigning a Multicast Address section. If using a Host
Name, you must configure a Domain Name Server on the
System Configuration > Network page.
If Auto Unicast, the following caveats apply: (1) this field is
the Host Name or IP address of the streaming server; (2)
this field does not support multicast IP addresses.
RTP Encapsulation Enable Use to configure MPEG2TS transmitters to be RTP
encapsulated before transmission. FEC requires RTP
Encapsulation. Consequently when you enable FEC Stream
1 or FEC Stream 2, RTP Encapsulation is auto-enabled and
this parameter is hidden. Conversely, if you do not enable
FEC Stream 1 or Stream 2, you still have the option to
enable RTP Encapsulation if desired. Default = Disabled.
RTCP Transmit RTP and MPEG2TS. Allows RTCP sender reports
(containing transmission and reception statistics for all RTP
packets) to be sent from the VBrick encoder. Default =
Enable.
RTCP Transmit Interval RTP and MPEG2TS. When RTP Encapsulation is enabled,
this parameter tells the encoder how often (in seconds) to
send RTCP reports. Default = 10 seconds.
Destination Video Port RTP only. Destination video port for this transmitter. Note
that viewing a unicast and multicast stream (configured on
different transmitters) on the same PC or the same decoder
may not work if the transmitter ports are the same.
Destination Audio Port RTP only. Destination audio port for this transmitter.
Destination Port RTMP and MPEG2TS only.
Announce Session Name
Override RTP and MPEG2TS. Lets you replace the Program Name
(on Encoder Configuration > Programs page) with a new
name to be used in session announcements, SDP files, and
RTSP Describe responses. This is especially useful in
multiple bit rate streaming.
Rather than having all transmitters use the same Program
Name for announcements, an administrator can optionally
assign a unique name to each transmitter. Default = blank.
This means the Program Name will be used.
Note: There is no validation for unique names. If using this
feature, the administrator is responsible for creating unique,
individual names for each transmitter.
Field Description