manualshive.com logo in svg

VBrick 9000 Series, Руководство администратора

Поделиться
Скачать
VBrick 9000 Series Скачать руководство пользователя страница 110

102

© 2015 VBrick Systems, Inc.

Servers Announce Settings

To access 

Announce Settings

 fields for a 

Server

:

1. Navigate to 

Encoder Configuration

 > 

Servers

 > 

Announce Settings

 section.

This section contains parameters that are used to modify announcements from the encoder. 
Announcements are advertisement packets that are transmitted by VBrick encoders to other 
VBrick encoders and VBrick applications such as the VEMS Portal Server and StreamPlayer. 
They are used to identify streams present in the network.

Servers Page Topics:

Servers Announce Settings

Servers External Announce Settings

Servers External Announce Settings

To access 

External Announce Settings

 fields for a 

Server

:

1. Navigate to 

Encoder Configuration

 > 

Servers

 > 

External Announce Settings

 section.

These settings configure an external announcement that can be used when the stream is 
reflected to a third-party server or a (future) VBrick reflector. 

Field

Description

Announce

This section is used to announce the RTSP streams to the local 
network allowing viewable RTSP announcements in programs 
like StreamPlayer. The unit must be on the same segment of the 
network or the router must be configured to retransmit 
broadcast packets for the announcements to be accessible using 
the IP address 255.255.255.255. Default = disabled.

Use Global Announce IP
 and Port

Use Announce Settings (IP Address for Servers and Port) 
defined on Encoder Configuration > Programs page. If 
checked, the Destination IP Address and Destination Port fields 
are greyed out.

Destination IP Address

The destination IP address the announcement is sent to. By 
default, the announcement is sent to the multicast network.

 If 

using an VEMS Portal Server, enter the Portal Server IP address.

Destination Port

The destination port to which the announcement is sent. 

Содержание 9000 Series

































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды