manualshive.com logo in svg

VBrick 9000 Series, Руководство администратора

Поделиться
Скачать
VBrick 9000 Series Скачать руководство пользователя страница 37

System Configuration

VBrick 9000 Encoder Admin Guide

29

Manage Configuration Page Topics:

Reset System Configuration

Read System Configuration

Restore System Configuration

Auto Configuration

Feature License

Feature License

To access the 

Feature License 

fields:

1. Navigate to 

System Configuration

 > 

Manage Configuration 

>

 Feature License 

section.

Starting with v4.1 and beyond, 9000 encoders can be augmented through the purchase of 
additional feature license keys. These keys will unlock features and capabilities within the 
9000.

Use the 

Feature License

 section to install additional features you have purchased by 

uploading a 

Feature License Key

. You may also check what additional features have already 

been installed on your encoder next to the 

Installed Feature Licenses

 label. The various 

licenses you are able to install are described below.

Presenter Encoder Feature License

The purchase and installation of a 

Presenter Encoder Feature License

 will convert any 9000 

encoder into a Presenter encoder with presentation features available such as the ability for 
end users to stream video and Webcasts directly from the 9000 using an intuitive 

Presenter 

Mode

 interface.

To install a Presenter Encoder Feature License:

1. Provide VBrick Support Services with the MAC address to your encoder.
2. Obtain the license file from Support Services that is created for your encoder.
3. Install the feature license as described above. The license will take effect immediately.

Field

Description

Feature License 
Key

Use the 

Browse

 button to locate the license key file on your local 

drive. Depending on the feature being installed, you may obtain the 
file through support or VBrick’s Download site.

Install Feature 
License

Click the 

Install

 button to upload the license key file to the encoder.

Installed Feature 
Licenses

Details all currently installed feature licenses.

Содержание 9000 Series

































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды