manualshive.com logo in svg

VBrick 9000 Series, Руководство администратора

Поделиться
Скачать
VBrick 9000 Series Скачать руководство пользователя страница 88

80

© 2015 VBrick Systems, Inc.

Transport Type

• RTP – Real Time Protocol. RTP is supported by the VBrick 

9000 Series decoder. 

• MPEG2TS – MPEG-2 Transport Stream. Used with KLV 

and FEC. 

• RTMP – Real Time Messaging Protocol. This is the 

multimedia streaming protocol used in Adobe Flash. 

• SMOOTH – Smooth Streaming Transport Type is an IIS 

Media Services extension that enables adaptive streaming of 
media to clients over HTTP. 

Select Video Rate

Select video rate (defined on Encoder Configuration > Video 
Input page) from dropdown list. 

Video Rate Enable

SMOOTH only. Select Video Rate. Note the following: 

• In this release only one Video Rate is available.
• All Video Rate(s) included in the Smooth Stream must have 

the same Frame Rate and IDR. 

• The IDR Frame Interval (on the Encoder Configuration > 

Video page) for rates assigned for Smooth Streaming streams 
must be 1 or 2 seconds (not zero).

Select Audio Rate

Select audio rate (defined on Encoder Configuration > Audio 
Input page) from dropdown list. 

Audio Rate Enable

SMOOTH only. Select Audio Rate. 

Estimated Bit Rate

Read-only. Shows the estimated bit rate with the configured 
options. The actual bit rate will vary based on the content. 

Enable Closed Caption

Enables closed captioning. Note: You will not be able to enable 
closed captioning and encryption on the same stream. Closed 
captions are sent as SEI NALs for compatibility with many 
standard video players and they are supported for all stream 
types except for Smooth Streaming. When enabled on RTMP 
streams, the captions are sent both as SEI NALs and as 
onCaptionInfo Flash metadata packets for compatibility with 
many Flash based players. Note: You will not be able to enable 
closed captioning and encryption on the same stream.

Field

Description

Содержание 9000 Series

































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды