VBrick 9000 Series, Руководство администратора

Страница: 25 / 192

System Configuration
VBrick 9000 Encoder Admin Guide 17

Network Page Topics:
Network
Domain Name Server Settings
Network Time Synchronization Settings
External FTP Server Settings
External FTP Server Settings

To access the
External FTP Server
fields:
1. Navigate to
System Configuration
>
Network
>
External FTP Server
section.
An external FTP server can be used with an Archiver in order to FTP recorded streams to a
remote server. See the Archivers topic for more about this functionality.
The
FTP Server User Name
and
Password
must be set up properly on the remote FTP server.
If they are not entered the same as what is set up on the server, the encoder will be unable to
connect and perform the transfer.
Primary Server IP Address Primary host name (VBrick Host Name or DNS Host
Name) or IP address of valid SNTP server providing time
synchronization. A blank field indicates the server address
will be acquired via the DHCP server only if the
Network
DHCP
field above is checked.
Secondary Server IP Address Secondary host name (VBrick Host Name or DNS Host
Name) or IP address of valid SNTP server providing time
synchronization. A blank field indicates the server address
will be acquired via the DHCP server only if the
Network
DHCP
field above is checked.
Note: DHCP Option 4 (TIME) and Option 42 (NTP) are requested from the DHCP
server to obtain SNTP server addresses. One or both of these options must be
enabled in the DHCP server for these addresses to be returned to the encoder. If both
are returned, the encoder will use the NTP server address. If the DHCP server
configuration is unknown, it is recommended that the address(es) be manually entered
since the DHCP server-supplied address will always override a manually-entered
address.
Field Description