manualshive.com logo in svg

VBrick 9000 Series, Руководство администратора

Поделиться
Скачать
VBrick 9000 Series Скачать руководство пользователя страница 111

Encoder Configuration

VBrick 9000 Encoder Admin Guide

103

Servers Page Topics:

Servers Announce Settings

Servers External Announce Settings

Archivers

To access the 

Archivers

 fields:

1. Navigate to 

Encoder Configuration

 > 

Archivers

.

Transport Streams only. An 

Archiver

 is used to store a local copy of a stream on existing 

internal or external hard drives. 

Archivers reference a stream which is comprised of the following 3 components:
•

Video Rate

•

Audio Rate

•

Transport Type. 

Archiving can be controlled locally using the 

Start

 and 

Stop

 buttons or it can be controlled 

from VEMS. VEMS can start and stop an archive and FTP files to and from the encoder. You 
can also set the start 

Mode

 to 

Automatic Start

 and the archiver will automatically start when 

you power on the encoder or insert an external storage device. Archiving can also be started 
in Presenter encoders by pressing the 

Record

 button.

The encoder supports a variety of internal and external storage devices. If the encoder is 
configured with a storage device, you can create an archive of any 

MPEG2TS

 transport stream. 

Once the archiving is complete, the file can be moved or FTPed to a VOD server, a file 

Field

Description

External Announce

This section is used to announce RTSP streams to a network 
device outside of the broadcast domain.

Use Global Announce IP
 and Port

Use Announce Settings (IP Address for Servers and Port) 
defined on Encoder Configuration > Programs page. If 
checked, the Destination IP Address and Destination Port fields 
are greyed out.

Destination IP Address

The destination IP Address or Host Name the announcement is 
sent to. If using a Portal Server, enter the Portal Server IP 
address. If using a reflector, enter reflector server IP address.

Destination Port

The destination port the announcement is sent to.

URL

The URL of the reflector (i.e the source of the reflected 
stream). This URL is embedded in the announcement.

Содержание 9000 Series

































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды