Vatech Smart Plus PHT-35LHS, Техническое руководство

Страница: 9 / 190

Smart Plus (PHT-35LHS)
Technical Manual
VT-TECH-Smart Plus-001
7 / 188
COPYRIGHT© 2018 VATECH
.
ALL RIGHTS RESERVED
3. Equipment Safety Instructions
This electro-medical device contains high voltage and current flowed parts, and the following
instruction must be followed to avoid critical damage to the body and equipment.
Electrical Safety Caution

The equipment and PC should be connected to a common protective
earth. Confirm that the equipment is well-grounded.

High voltage and current flows throw equipment. Turn off equipment
power and wait at least 2 minutes before the operation begins.

Do not connect this equipment to any devices without authorization from
Vatech. Inc.

Do not connect this equipment to a Multiple Portable Socket- Outlet
(MPSO) or extension wires

Keep in mind that MCU boards are electrically sensitive that operators
need to wear shielding gloves during operation.

The only part that can be replaced by the users is the input fuses. Check
if the fuses comply with the manufacturer’s specifications.
Mechanical Safety Caution

Ensure that your fingers or any part of your body are shut in the
equipment.

Press the emergency stop button to stop the equipment when a problem
occurs during the operation. The equipment will be cut off from the
power as you press the button.

Do not touch the patient while touching the SIP or SOP connector.

Ensure that the patient’s eyes directly contact the laser beam when you
are guiding his or her position.

Never expose the equipment to liquids, mists, or sprays. They can
cause electrical accidents such as an electric shock or system damage.

Do not use spray cleaners on the equipment to avoid fire.

Do not use solvent aerosol or spray cleaning agents directly on the
surface of the equipment. It can damage equipment including the LCD
panel.
.