Urschel COMITROL 2100, Инструкция по эксплуатации

Страница: 19 / 166

A.17 Addendum
Manual Page Number Revision
46-47 Maintenance, Electrical Assembly (continued) : Add the following.
Replacing the Motor Load Indicator
1. Disconnect the secondary wires from
the back of the motor load indicator.
2. Remove the indicator. Remove the
fasteners that secure the indicator to the
bracket (1)
. The fasteners are located on
the backside of the bracket.
3. Install the replacement indicator. Install
the fasteners that secure the indicator to
the bracket.
4. Locate the wire that is wound through
the
current transformer (2)
. Connect this
wire to the positive terminal on the back of
the indicator. Connect the remaining wire
to the negative terminal.
5. Test the indicator. See the instructions in
this addendum.
1
2
Manual Page Number Revision
56-57 Parts, Tools: Items 1 and 2 have been replaced by:
98137 - Wrench,13 piece. set, chrome plated, ball end
98163 - Screwdriver, flat head, 1/4" flat x 6"
Items 4 and 6 have been replaced by:
98130 - Wrench, combination, 1/2", chrome plated
98131 - Wrench, combination, 7/16", chrome plated