Urschel COMITROL 2100, Инструкция по эксплуатации

Страница: 102 / 166

24
MACHINE SHIPMENT
Every Urschel machine is fully inspected
and test-run before it is shipped. The Model
2100 is shipped completely assembled.
Spare parts and required tools are packed
in separate boxes and shipped in the crate
with the machine. Check the exterior of the
machine for damage. Visually check the
feed hopper and impeller area for objects
which may have entered the machine
during shipping.
PRE-INSTALLATION PLAN
Before installation, prepare a plan to make
the use of this machine safe and efficient.
This plan should consider location, electri-
cal power source and method of feeding
and collecting product. Installation should
comply with all applicable safety codes and
regulations.
LOCATION
Choose a location that provides
machine stability, ample space, and a
clear path on all sides of the machine so
that operators can move safely and easily
in a clean, dry work area. Provide easy
access to the controls on the starter enclo-
sure and also allow room for cleaning and
maintenance. The location should provide
level footing, adequate lighting and venti-
lation and provisions for excessive noise
levels. Never locate machine in an area
with a potentially explosive atmosphere. A
potentially explosive atmosphere could be
created if processing your product creates
fumes or dust in sufficient concentrations.
Urschel Laboratories recommends that
this machine be installed at floor level. If
elevating the machine is unavoidable, all
operation, cleaning, maintenance and safety
features of a floor level installation must be
maintained.
LIFTING THE MACHINE
WARNING: Secure machine frame to
lifting forks with a chain or strap to pre-
vent tipping. If the machine tips and falls
from lifting forks, bodily injury from
crushing and damage to the machine may
result.
CAUTION: Always use the frame to
lift or move the machine, never the starter
enclosure, motor, covers or guards. Do
not crush electrical cords beneath frame
when lifting machine!
Both sides of machine frame should rest
on lifting forks. (Figure 17).
INSTALLATION
Shipment, Pre-installation, Location, Lifting
Figure 17 — Always use frame to lift or move machine.
(1) Lifting Forks
1