Universal Devices ISY-994i Series, Руководство пользователя

Страница: 343 / 692

Page | 320
11.10 Utility Programs
11.10.1 Averaging Using Only the Best Values
This is a program I created to stabilize inputs from more than one source. Any "wild"
sensor inputs get cut out of the calculation.
11.10.1.1Operation
•
the last known working average is kept for comparison purposes during the next
iteration.
•
a constant $cAVERAGE.DEV.MAX variable is set to the allowable deviation limits for
a sensor to be considered "bad". I have set mine to 2.0 degrees for this purpose
•
each input is compared to the last known average and the absolute value compared
to the allowable deviation factor.
•
good sensor readings are tallied and used to calculate the new average
•
if all values are outside the maximum deviation then a completely new average is
created from all sensors.
11.10.1.2 Benefits
•
gives a more stable resultant
•
detects and isolates any sensors gone bad or "out-of-range of the crowd" readings.
•
gives a contributor count that can be used for other purposes. eg: Temperature
variance detection for circulation. fan operation from indoor temperature sensors
•
I have a temperature sensor mounted up under a PV array and the oven effect gets
disallowed every late morning with this program.
•
this can use as many sensors as available to further stabilize the resultant output.
Just add more lines of program code.
•
ISY is fast. No delays can be noticed and lots of repeats allows other processing to
occur during the calculations.
11.10.1.3 Negatives
•
based on slow changing sensor values like temperature readings from thermostats
and probes. Sudden value jumps may disrupt the process.
•
all three sensors outside the past average results in including all three sensors to
start. This may not be the best algorithm for some cases.