Universal Devices ISY-994i Series Скачать руководство пользователя страница 44

Страница: 44 / 692

Page | 21

you remember the new user name and password as the default account of user

name/password admin/admin will no longer work in future logins.

Firmware versions 5.0+ allow up to ten users, one of which is the administrator.

•

Both User ID and password must be entered.

•

User ID and passwords are case sensitive.

•

The ID and password are limited to 10 characters maximum.

•

The ID and password have a minimum of 3 characters.

•

These characters are not allowed: < > / ; &

Figure 12: File -> Set Userid/Password Menu

5.2.1.3Refresh Device Status

This option refreshes the device status. Firmware v5+

5.2.1.4Backup ISY

Selecting this menu saves the entire ISY configuration in a file. The user will be prompted to

select or type the storage location and name the configuration file. Note the location and

file name for future use. The following system information will be saved to this file:

•

Time Zone, Latitude, and Longitude

•

Notification recipients

•

Programs

•

INSTEON devices information and scene memberships

Содержание ISY-994i Series





















































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ISY-994i Series

Отзывы:

Похожие инструкции для ISY-994i Series

Бренды по названию

Популярные бренды

Universal Devices ISY-994i Series, Руководство пользователя

Результаты поиска

Содержание ISY-994i Series

Отзывы:

Похожие инструкции для ISY-994i Series

Бренды по названию

Популярные бренды