Unitronics electric UM2B, Руководство пользователя

Страница: 53 / 109

5.- SOFTWARE DESCRIPTION
- 51 -
On completion of the measurement, the maximum result will be shown in the
corresponding box and will be plotted on the graph. The transformer will then be
discharged, the message shown in Figure 5-25 appearing throughout the entire process.
Figure 5-25: Discharge message.
Once the measurement has been completed (all the cycles are finished), the program
will undertake the complete discharge of the transformer; during this time, the message
shown in Figure 5-26 will be displayed.
Figure 5-26: Final discharge of the transformer.
If there is no problem, the program will show Figure 5-27 on completion of
measurement for all the cycles, indicating that the test has been completed. The unit will
indicate the end of the test to the user by means of a series of acoustic sounds to claim his
attention. This is specially useful if the user is far from the unit performing another work
while the test evolves.
Figure 5-27: Warning for test end.
The measurement may be cancelled at any moment by clicking on the button.
If this occurs, the program will undertake discharging of the transformer (Figure 5-26), and
will remain ready for a new measurement.