ULTRAFRYER F-P20-18, Руководство по эксплуатации

Страница: 16 / 60

30A168
START BUTTON - When this button is momentarily depressed, it places the fryer in operation.
RED STARTED LAMP - When lit indicates the START BUTTON has been
momentarily depressed and the fryer is operating.
AMBER MELT MODE LAMP - When lit indicates the
MELT CYCLE TIMING MODULE
in the Default-To-Melt circuit is
cycling the fryer Heat System
ON
for twelve (12) seconds and
OFF
for 28 seconds to safely heat shortening.
EXIT MELT BUTTON - When this button is momentarily depressed the
MELT CYCLE TIMING MODULE
in the Default-
To-Melt circuit will switch to the
FULL ON
position allowing the electronic thermostat to heat shortening to its pre-set temp-
erature.
G. OPTIONAL CONTROLS : The Model PAR-3-H gas fryers may be equipped with an Ultrastat Model 11, 21, or 25 Cooking Com-
puter as described below:
1. ULTRASTAT 11 COOKING COMPUTER: Some Model PAR-3-H-3 gas fryers
are equipped with an Ultrastat 11 Cooking Computer which is connected to
the fryer’s electrical system to serve as its thermostat as well as providing heat
control, status information and product cook timer. When the computer is in
operation it will
DISABLE the fryer if the drain valve is OPENED . Operation
of the Ultrastat 11Cooking Computer is covered in the Ultrastat 11 Ultrafryer
Computer Operation Instrutction PN 30A053 provided with Fryers equip-
ped with that Cooking Computer.
2. ULTRASTAT 21 COOKING COMPUTER: The Ultrastat 21 Cooking computer
is in compliance with the limits for a class B computing device pursuant to
Sub-Part J of Part 15 of the FCC Rules. This cooking computer is capable of
cooking up to eight (8) different products; each of which can be programmed
to be cooked from one (1) to ten (10) different temperature at different times
in a cook cycle. In addition, the operator can program the ULTRASTAT 21
computer to cook products under “FLEX” or “STRAIGHT” timing modes.
When programmed for “FLEX” time mode the computer will adjust the actual
cook time taking into consideration the temperature variation due to load size,
initial product temperature, product moisture content, and other factors that affect the cook cycle. Under “STRAIGHT” time
mode, the product is cooked at a specified temperature for the length of time programmed without adjusting for these varia-
tions. Operation of the ULTRASTAT 21 cooking computer is covered in the ULTRASTA21 Fryer Computer Operation
Instructions PN 30A009 provided with fryers equipped that computer.
��� ������� ����
����� ����
���� ����
���� �����
�� �����
����
�����
������
���� ����
������
Page 12 of 56