UD Trucks QUESTER Series, Руководство пользователя

Страница: 228 / 244

10.EMERGENCY PROCEDURES
10-2
Manual release of parking brake
Manual release procedure
1. Block the wheels to prevent the
vehicle from moving.
2. Release the release nut by
turning it anti-clockwise (Do not
use impact wrench).
3. To ensure the compression
spring is fully caged, the stud
length should be approximately
75 mm.
Towing
WARNING
• Do not release the parking
brake manually, if the vehicle
stops on a slope.
• Do not perform manual release
e x c e p t f o r e m e r g e n c y
movement of the vehicle or
towing with a tow vehicle.
•
If the vehicle stops with the
spring brake, failure of the
brake system may be possible.
H a v e i t i n s p e c t e d b y t h e
nearest UD Trucks authorised
dealer.
CAUTION
The release nut is secured on
the release bolt with the knock
pin. Do not remove the knock
pin. Otherwise the parking brake
cannot be released.
WARNING
If the engine does not start, tow
the vehicle using a tow vehicle
only. If the engine does not start,
the brake and power steering
will not work.
CAUTION
• F o r t o w i n g , b e s u r e t o
disconnect the propeller shaft.
Towing with the propeller shaft
w i l l l e a d t o t r a n s m i s s i o n
failure.
• If the vehicle accidentally falls
into ditch or trench, do not use
the tow pin to pull the vehicle
o u t . C o n t a c t U D Tr u c k s
authorised dealer for support.