UD Trucks QUESTER Series, Руководство пользователя

Страница: 159 / 244

8.INSPECTION AND MAINTENANCE
8-11
Replacement procedure and period
1 Clean around the filter bracket.
2. Place suitable container below
the filter to collect fuel.
3. Loosen the fuel tank cap to
release any pressure within the
tank.
4. Remove the filter using a filter
wrench.
5. Lubricate the new filter gasket.
6. Screw on the filter manually using
hand until the filter gasket comes
in contact with the housing sur-
face.
7. Tighten the filter by additional half
or three-quarter turn.
8. Replace the pre-fuel filter at the
s a m e t i m e t h e f u e l f i l t e r i s
replaced.
9. Disconnect the harness connec-
tor.
DANGER
Fuel leakage may cause fire. The
filter must be firmly installed in
order to prevent the leakage.
CAUTION
Do not allow the fuel to spill over
a n d d a m a g e e l e c t r i c a l
components.
NOTE
The new fuel filter should be
empty when replacing the fuel
filter. Never fill the fuel in a new
fuel filter before installing a fuel
filter.