UD Trucks QUESTER Series, Руководство пользователя

Страница: 203 / 244

8.INSPECTION AND MAINTENANCE
8-55
Replacement of differential gear
oil
Initial replacement:
A f t e r i n i t i a l 5 , 0 0 0 k m o r 1 m o n t h
(Whichever comes first.)
Replacement procedure
1. To drain, remove the drain plug.
Clean the magnet in the drain plug
which collects accumulated iron
sediments in the oil.
1. Filler plug
2. Drain plug
2. To refill, remove the filler plug
and pour UD oil into the case
through the filler plug hole.
Tightening torque:
Drain and filler plug
80
± 16
Nm {8.15 - 1.63 kgfm}
3. When refilling, ensure care to
avoid dirt or dust from entering the
filler plug hole.
CAUTION
Using non UD lubricants can
result in severe consequential
d a m a g e s , w h i c h w i l l n o t b e
covered by warranty.
WARNING
Check or replace the differential
gear oil after the rear axle is
cooled to avoid injuries.
CAUTION
Use a funnel while pouring oil to
avoid the filler plug hole dirt
from entering into the axle.
Before removing the oil filler
plug, clean the plug and the area
around the plug.