UD Trucks QUESTER Series, Руководство пользователя

Страница: 199 / 244

8.INSPECTION AND MAINTENANCE
8-51
To check the engine oil level
1 . P a r k t h e v e h i c l e o n a l e v e l
surface.
2. Remove the dipstick located on
the left hand side of the engine.
Wipe it clean with an clean cloth
a n d r e i n s e r t i t . R e m o v e t h e
dipstick and check the oil level.
M a i n t a i n t h e e n g i n e o i l l e v e l
between the MAX and MIN mark
on the dipstick.
3 . I f t h e o i l l e v e l i s l o w, a d d o i l
t h r o u g h t h e o i l f i l l e r p o r t ( 1 )
located on top of the engine. Do
not add oil above the MAX mark
on the dipstick.
1. Oil filler cap
4 After adding oil, wait at least for
10 minutes, then recheck the oil
level.
5 After checking, insert the engine
oil dipstick.
Replacement of engine oil
Oil capacity
Refer “Capacities” in Chapter 11
WARNING
Handle oil with care to avoid
spilling. Do not add oil if the
engine or exhaust system is hot.
Spilling oil on hot parts can
result in a fire.
CAUTION
• Do not drive the vehicle with
the engine oil level below the
LOW mark on the engine oil
level gauge. Driving with the
engine oil level below the LOW
m a r k w i l l l e a d t o e n g i n e
seizure.
• U s e c a r e t o k e e p d i r t a n d
d e b r i s f r o m e n t e r i n g t h e
crankcase through the oil filler
port when adding engine oil.