UD Trucks QUESTER Series, Руководство пользователя

Страница: 215 / 244

8.INSPECTION AND MAINTENANCE
8-67
Handling filler cap
1. Cap
2. Unlock position
3. Turning angle
4. Lock position
Removing the filler cap
• When the cap is locked, the cap
r o t a t e s f r e e l y a n d c a n n o t b e
opened. Insert the AdBlue tank
key and unlock it by turning the
cap 90° to the left. Remove the
key after unlocking.
When the cap is not locked, the
cap does not rotate freely, the cap
can be opened.
• Turn the cap to the left to remove
it and then fill the tank with urea
water solution (AdBlue)
Attaching the cap
• Turn the cap to the right until it
locks.
• Insert the AdBlue tank key and
turn it 90° to the right to lock the
cap. Remove the key while it is in
this position.
When fire or leak occurs
• Urea water solution (AdBlue) is
non-flammable, but quickly move
it to a safe location if there is a
fire.
• If urea water solution (AdBlue) is
spilled, wash it away with water. It
can be disposed off by diluting it
with a large amount of water and
then pouring it into the sewage
system. It must be treated as
industrial waste in areas with
nitrogen restrictions.
WARNING
Handle Adblue with proper care,
avoid contact with skin. If it is
spilled on the body, wash with
water immediately.
NOTE
• Turn the key until the cap is
locked. The key will lock the
cap only when it is in the lock
position.
• To remove the key, turn it all
the way to the lock or unlock
position. Trying to remove the
key in between these positions
will damage it the key and lock.