UD Trucks QUESTER Series, Руководство пользователя

Страница: 123 / 244

6.DAILY INSPECTION
6-1
6.DAILY INSPECTION
6.1 Areas to inspect
• It is important for the driver to be completely aware of the vehicle’s condition on a day to day basis, to prevent
accidents and malfunctions. For this reason, always conduct the daily (pre-driving) inspection once a day before
driving the vehicle.
• Conduct the inspection in the following order to make sure that the daily (pre-driving) inspection is conducted in a
proper way. The detailed inspection instructions are explained below.
• The inspection items shown in bold are items that are conducted appropriately based on the vehicle's
mileage, driving conditions, and other factors.
• In addition, when trouble occurs, have the vehicle inspected and repaired at UD Trucks authorised dealer.
1.Have all the problems from the previous day
been completely repaired?
2.Vehicle exterior
• Are the tyres inflated to the proper air pressure? Also, are there any cracks, damage, or
abnormal wear out?
• Is the tyre tread groove depth enough?
• Is the engine oil filled to the proper level?
• Is the engine coolant filled to the proper level?
• Has water condensation been removed from the air reservoir?
• Is the window washer fluid filled to the proper level?
• Has the water accumulated in primary fuel filter been removed from it?
• Are the lights are they dirty or damaged?
• Is the greasing of front spring pin and shackle pin is done for every 5000 km?
• Is the greasing of rear spring pin and shackle pin is done for every 5000 km?
• Is the wheel nuts are tightened to the specified torque?
3.Get into the cab
• Is the parking brake released properly?
• Is the window washer fluid sprayed properly?
• Does the wipers wipe properly?
4.Start the engine
• Does the engine start well? are there any abnormal sounds?
• Does the engine run at idling speed and accelerate properly?
• Does the air pressure as seen by the air pressure gauge rise well?
• Is the air exhausting noise normal, when the brake valve (pedal) is pressed and released?
• Do the lights and indicators illuminate and flash properly?
5.Drive the vehicle • Do the brakes work well?