UAZ HUNTER 315195, Руководство по эксплуатации

Страница: 98 / 136

98
Move clip 3 until pistons 9 rest in the inner surface of
crankcase 17. Bypass valve 14 can be opened to ease the fluid
displacement from crankcase 17. Close valve 14 as soon as
pistons 9 completely sink into the crankcase. Before moving
clip 3, remove the cap of the master cylinder tank and do not
let the fluid overflow while moving the clip.
It is prohibited to recess the pistons with a tire iron as it can
deform guide bushings 10 and disable clip 3.
Replace worn brake shoes from both sides of the front axle
shaft. To place the shoes against the disc, press the brake pedal
2-3 times.
Install spring 1, spring carrier 18 and screw bolts 16.
During further operation, the necessary gap between the brake
shoes and the brake disc is supported automatically.
rear drum brakes (fig. 9.35). Remove brake drums periodically
and clean the brake parts from dust and dirt. The frequency
depends on vehicle operation conditions. Clean the drums more
frequently in the summer and when driving on dirty roads, and
less frequently in the winter.
Fig. 9.34 Front disc brakes:
1 — spring; 2 — shoes; 3 — clip; 4 — caliper; 5 — protective cap; 6 — snap
ring; 7 — O-ring; 8 — protective boot; 9 — piston; 10 — bushing; 11 — bolt;
12 — screw; 13 — plug; 14 — proportioning valve; 15 — cap; 16 — spring car-
rier bolts; 17 — crankcase; 18 — spring carrier