UAZ HUNTER 315195, Руководство по эксплуатации

Страница: 27 / 136

27
20 — parking brake lever. To engage the parking brake, move
the lever up; to disengage, push the button on the butt end and
move the lever down until it stops;
21 — switch of rear fog lights with built-in illumination lamps
and switch-on sensing lamps;
22 — three-position switch of the electric motor heater;
23 — external illumination switch;
24 — accelerator pedal;
25 — brake pedal;
26 — clutch disengagement pedal;
27 — hood latch drive lever;
28 + — radiator grill control handle.
When the handle is
pulled, the grill shutters close;
29 — ignition switch
(UAZ-315148 — engine start switch)
(Fig. 3.5). The ignition lock switch is fixed on the steering
post with breakaway-head bolts to prevent dismantling of the
ignition lock with anti-theft device using standard wrenches. At
the Manufacturer's plant, the bolt heads are not broken away
to retain possibility to remove the lock from the steering post
during the pre-sale period. A consumer must make his/her own
decision whether to break the heads away or not.
The ignition lock switch has four positions:
0 — everything is off (stable position);
I — ignition is on (stable position);
II — starter is on (unstable position);
III — standstill (stable position).
The key can only be removed from the lock in position III;
at the same time, the locking device mechanism actuates and
locks the steering system shaft.
To lock the steering system in standstill, set the key to position
III, remove it and turn the steering wheel in any direction until a
click is heard, indicating that locking device catch has matched
the groove of the steering wheel shaft stop sleeve.
Fig. 3.5. Position of the key in the ignition switch
(for position names, see the relevant text)