UAZ HUNTER 315195, Руководство по эксплуатации

Страница: 117 / 136

117
Chapter 11. PreSerVATIon
If the vehicle is to be removed from operation for a prolonged
period of time — more than 1.5 months, it should be subjected
to preservation procedures, for which purpose do the following:
1. Carry out the scheduled maintenance.
2. Wash the vehicle and wipe it dry. Remove corrosion and
touch up the paintwork wherever damaged.
3. To protect the engine cylinders against corrosion, pour
30-50 g of hot engine oil used for the engine (except for engine
ZMZ-51432) into the cylinders. To ensure uniform spreading
of oil throughout the entire surface of the cylinders, rotate the
engine crankshaft by approximately 15 revolutions.
4. Clean all wires from dirt and wipe dry.
5. Use the preservative lubricant PVK (if not available, use
petroleum jelly) for all unpainted external metal surfaces of
the vehicle and all unpainted parts of hinged couplings (hinges
and door locks, parking brake drive rods, control rods of the
carburetor, towing gear and other units, and also spark plugs).
6. Lubricate the springs with a graphite lubricant.
7. Check, clean the tools, accessories and spare parts set and
wrap them with oiled paper or with cloth.
8. Seal the windows from outside with light-tight paper (cloth)
or shut with shields.
9. Remove the wheels from the vehicle, clean the wheel discs
from dirt and touch up the areas with damaged paint. Clean,
wash and wipe dry the tires, bring the tire inflation pressure to
normal.
10. As required, flush out the fuel tanks and fill them with
fuel.
11. Prepare the battery for storage, as specified in the
maintenance manual for vehicle lead batteries.
12. Seal the slit of the air cleaner and the muffler exhaust
pipe with oily paper.
13. Loosen the tension of the fan driving belt and steering
gear pump, of the alternator and the water pump.
14. Drain the coolant from the cooling system, heater radiator
and the fluid from the windshield washer reservoir.