UAZ HUNTER 315195, Руководство по эксплуатации

Страница: 114 / 136

114
LUBRICATION OF THE VEHICLE
Adherence to the instructions of this manual and the service
book on lubrication of the vehicle is imperative. The grease
brands and types are indicated in the Lubrication and Special
Liquids table (see Appendix 3). It is not allowed to use oils and
greases not indicated in the table, or to use oils and greases with
the expired date either.
The description of the lubrication of the units and changing
the grease is found in the corresponding sections of the Manual.
Within 24 hours after overcoming a ford, check the oil
condition in all the aggregates. If water is detected in the oil,
change the oil in that aggregate, and lubricate all the grease
pumps of the chassis until fresh grease squeezes out of them.
In the process of lubrication, adhere to the following rules:
1. Drain oil from the engine and the transmission aggregates
immediately after the vehicle stops and the aggregates are hot.
2. Thoroughly remove dirt from the grease pumps and plugs
before lubricating to avoid an ingress of dirt into the vehicle
mechanisms.
3. Upon lubrication, remove the squeezed out or leaked
lubricant from all parts.
4. Before filling the housings with fresh oil, wash them if
the wasted oil, drained from the housings of the engine and the
transmission aggregates, is contaminated or metal particles are
detected in it.
5. Mixing (adding) of engine oils of different brands and
different manufacturers is not allowed.
When changing the oil brand or manufacturer, flush the
engine lubrication system.
6. Mixing he grease Litol-24 with the substitute grease Lita is
allowed in any proportions. When using other substitutes, flush
the unit with kerosene.
7. Mixing the brake fluids "Rosa", "Rosa-3", "RosDot", "Tom",
"Rosa Dot-4" is allowed in any proportions.