AudioTron
Reference Manual
Page 1
Notices
AudioTron Reference Manual Guide, Version 1.4; March 2001
Copyright © 2001 Voyetra Turtle Beach, Inc.
All rights reserved.
No part of this publication may be reproduced or transmitted by any means or in any form, without prior written consent from Voyetra Turtle Beach, Inc. (“VTB”).
In no event will VTB be liable for direct, indirect, special, exemplary, incidental, or consequential damages resulting from any defect or omission in this manual,
even if advised of the possibility of such damages. In the interest of continued product development, VTB reserves the right to make improvements to this manual
and the products it describes at any time, without notices or obligation.
Turtle Beach, the Turtle Beach Logo and AudioTron are trademarks of Voyetra Turtle Beach, Inc. AudioStation, the Voyetra
logo and Voyetra are registered trademarks of Voyetra Turtle Beach, Inc. CDDB-Enabled, CDDB, and the CDDB logo are
trademarks of CDDB, Inc. Microsoft, Windows and Windows Media are trademarks or registered trademarks of Microsoft
Corporation. All other names which may be the trademarks or registered trademarks of their respective companies are hereby
acknowledged.
Important safety information
Your Turtle Beach™ AudioTron is designed and tested to meet the latest standards for safety of digital music
technology equipment. However, to ensure safe use of this product, it is important that the safety instructions
marked on the product and in the documentation are followed. Always follow these instructions to help guard
against personal injury and damage to your product:
•
Read and follow all instructions marked on the product and in the documentation before you operate your
system. Retain all safety and operating instructions for future use. Do not use this product near water or a
heat source such as a radiator. Set up the system on a stable work surface. The product should be
operated only from the type of power source indicated on the rating label.
•
Openings in the product case are provided for ventilation. Do not block or cover these openings. Make sure
you provide adequate space, at least 6 inches (15 cm), around the system for ventilation when you set up
your work area. Never insert objects of any kind into the ventilation openings.
•
This product is equipped with a three-conductor power cord to make sure that the product is properly
grounded when in use. The plug on this cord fits only into a grounding-type outlet. This is a safety feature. If
you are unable to insert the plug into an outlet, contact an electrician to install the appropriate outlet. If you
use an extension cord with this product, make sure that the total ampere rating on the products plugged into
the extension cord does not exceed the extension cord ampere rating. Do not walk on the power cord or
allow anything to rest on it.
•
Do not spill anything on the product. The best way to avoid spills is to avoid eating and drinking near the
product. To avoid electrical shock, always unplug all cables from product before cleaning the product.
•
When the product is turned off, a small amount of electrical current still flows through it. The power cord
should be unplugged from the wall outlet when the device is not used for extended periods of time.
•
This equipment contains no user serviceable parts. Please refer all servicing to trained, qualified service
personnel.
•
Unplug the product from the wall outlet and refer servicing to qualified personnel if: (1.) The power cord or
plug is damaged. (2.) Liquid has been spilled into the product. (3.) The product does not operate properly
when the operating instructions are followed. (4.) The product was dropped or the cabinet is damaged. (5.)
The product performance changes.
Caution
•
Do not use this product in areas classified as hazardous locations. Such areas include patient care areas of
medical and dental facilities, oxygen-laden environments, or industrial facilities.
•
To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord.
•
Replace fuse only with a 5 x 20mm Slo-Blo® UL/CSA Cartridge Type Fuse matching the original equipment
specifications.
