TSI Instruments SIZER EEPS 3090, Руководство по эксплуатации и обслуживанию

Страница: 85 / 185

Software Operation 5-35
When the Zero the Electrometers... button is pressed, the following
message box is displayed (Figure 5-27). To continue with the zeroing
procedure, select the
Yes button. Refer to the " Troubleshooting " section in
Chapter 6 which discusses this procedure and some possible reasons for
doing a zero on the instrument.
Figure 5-27
Zero Electrometer Function Dialog Box
If you answer “Yes” to continue, the zeroing procedure will start. A
progress dialog will display while the zeroing is taking place. The zeroing
takes approximately 45 seconds.
Figure 5-28
Zero Electrometers Progress Dialog Box