TSI Instruments SIZER EEPS 3090, Руководство по эксплуатации и обслуживанию

Страница: 71 / 185

Software Operation 5-21
New
Select File|New or or <Ctrl><N> to open a new file and prepare to
collect sample data.
After you select
New , you are prompted to enter a filename. Accept the
default filename or enter any filename you chose then select OK .
A Run View window opens on the desktop with the filename you entered. If
other windows were open at the time you last closed a file, these windows
also open on the desktop. All graphs and tables are initially empty. You are
ready to start collecting data
. Refer to “
How to Perform a Sample Run
” for
a complete description.
Open
Select File|Open or or <Ctrl><O > to open an existing file. By default,
the program will look for files in the same directory location as the last file
you opened or in the same directory as the EEPS program if this is the first
time running the program. All files are automatically given the appropriate
filename extension (.3090d). If you store data files in another directory or
on another drive, you must first display the file pathname in the Open
dialog box before you can select and open it.
When the file opens, a window (or windows) will open on the desktop
displaying the data in this file.
Multiple files can be open on the desktop at the same time. Only one
window, however, is the active window.
Close
Select File|Close or or < Ctrl >< W > to close a file (and all the windows
associated with it). If there are windows open on the desktop from more
than one file, Close will close only those windows associated with the file
whose window is currently active. If you attempt to close a file that has
been changed but not saved, you will be prompted to save the changes
before closing the file.
Since the Run View is the controlling view for a file, closing this window
using the
button in the upper right corner also closes the file.