TSI Instruments SIZER EEPS 3090, Руководство по эксплуатации и обслуживанию

Страница: 44 / 185

3-8 Model 3090/3090AK Engine Exhaust Particle Sizer
TM
Spectrometer
Save Settings to File.../Load Settings to File...
Use these two buttons to save the run settings you have set up and recall
them for later use.
To save the current settings, click the Save These Settings... button and
enter a filename (and, if desired, a different directory/folder/drive) and then
select
Save .
To recall settings you have saved, click the
Load Settings from a File...
button, highlight the filename you want to recall (after navigating to the
appropriate folder if necessary) and selecting
Open .
V i e w i n g D a t a
View data in a table or graphs while the data is being collected and change
how data is viewed after sampling ends.
Note: To view the data on the LCD panel of the EEPS spectrometer, refer
to Chapter 4 .
Change scales, time resolution, weighting, and other parameters, as well as
play back the entire run.
Data can be viewed in the graphs either logarithmically or linearly and at
different time resolutions. The particle data in the 2-dimensional graph
represents an individual histogram at a selected time.
The following procedure provides an example of how to change how data is
viewed for an existing run. Refer to
Chapter 5 for a complete description.
1. Open an existing run file using File|Open or by pressing on the
toolbar. Figure 3-6 shows sample data.