Trox Technik FKR-EU, Инструкция по установке и эксплуатации

Страница: 34 / 164

Solid walls

Solid walls or compartment walls made of, for
example, concrete, aerated concrete, masonry, or
solid gypsum wallboards according to EN 12859
(without open spaces), gross density
≥
350 kg/m³.

Wall thickness W ≥ 100 mm, solid gypsum wall-
boards W
≥
80 mm.

Provide each installation opening and core drilled
holes according to the local and structural conditions
and with regard to the dimensions of the fire
damper.
Fig. 18: Distance from the FKR-EU to other TROX fire
dampers in mortar-based installation
* For flange construction
Distance between different TROX fire dampers in
mortar-based installation in solid walls (one installa-
tion opening)
Item no. Damper combination up to EI 90 S
1 FKR-EU / FKR-EU
2 FKR-EU – FK2-EU
3 FKR-EU – FK-EU
3 FKR-EU – FKRS-EU
Lightweight partition walls with metal support struc-
ture

Lightweight partition walls, safety partition walls or
walls to provide radiation protection, with metal sup-
port structure or steel support structure (box sec-
tions), with European classification to EN 13501-2 or
equivalent national classification.

Cladding on both sides made of gypsum bonded or
cement bonded panel materials, fibre-reinforced
gypsum or fire-rated calcium silicate boards.

Wall thickness W
≥
94 mm, for compartment walls or
safety partition walls W ≥ 100 mm.
 Distance between metal support structures
≤ 625 mm; distance between metal support struc-
tures in compartment walls ≤ 312.5 mm.

Compartment walls and safety partition walls may
be provided with sheet steel inserts and may require
less space between the metal studs.

Create an installation opening with trimmers (studs
and noggings).

If necessary, provide trim panels and screw-fix them
to the support structure

Additional layers of cladding (if stated in the usability
certificate for the wall) or double stud constructions
are approved.

Connect the metal sections near the installation
opening according to the installation details in this
manual.

If reinforcing boards are required, they must be
screwed to the metal support structure at intervals of
approx. 100 mm.

Installation only permitted in non-load-bearing walls
(load-bearing wall constructions on request).

The structural properties of the wall must be
ensured by others and any necessary compensation
measures, especially with large installation open-
ings, must be checked and taken into account by
others.
Installation
General installation information
Fire damper FKR-EU 34