Triumph 2010 Tiger 800, Руководство по обслуживанию

Страница: 435 / 508

'
.
The use of tyres other than those listed in the
specification section of the owner's handbook may
adversely affect handling leading to loss of control or an
accident.
Use the recommended tyre options only in the
combinations given in the owner's handbook.
Do not mix tyres from different manufacturers or tyres
from the same manufacturer but from another option.
'
.
Always check tyre pressures before riding when the
tyres are cold. Operation with incorrectly inflated tyres
may affect handling leading to loss of control and an
accident.
Operation with excessively worn or damaged tyres will
adversely affect handling and control leading to loss of
control or an accident.
Do not install tube-type tyres on tubeless rims. The bead
will not seat and the tyres could slip on the rims, causing
tyre deflation that may result in a loss of vehicle control
and an accident.
Do not install an inner tube inside a tubeless tyre. This
may cause instability and excessive heat build-up may
cause the tube to burst resulting in rapid tyre deflation,
loss of vehicle control and an accident.
Accurate wheel balance is necessary for safe, stable
handling of the motorcycle. Do not remove or change
any wheel balance weights. Incorrect wheel balance may
cause instability leading to loss of control and an
accident.
When wheel balancing is required, such as after tyre
replacement, see your authorised Triumph dealer.
Only use self-adhesive weights. Clip on weights will
damage the wheel and tyre resulting in tyre deflation,
loss of control and an accident.
Wheels/Tyres
When replacement tyres or inner tubes are required,
consult your authorised Triumph dealer who will
arrange for the tyres and inner tubes to be selected, in a
correct combination, from the approved list and fitted
according to the tyre and inner tube manufacturer's
instructions.
When tyres and inner tubes are replaced, allow time for
the tyres and inner tubes to seat to the rim
<approximately 24 hours). During this seating period,
ride cautiously as an incorrectly seated tyre or inner tube
could cause instability, loss of motorcycle control and an
accident.
Initially, the new tyres and inner tubes will not produce
the same handling characteristics as the worn tyres and
inner tubes and the rider must allow adequate riding
distance <approximately 100 miles) to become
accustomed to the new handling characteristics.
24 hours after fitting, the tyre pressures must be
checked and adjusted, and the tyres and inner tubes
examined for correct seating. Rectification must be
carried out as necessary.
The same checks and adjustments must also be carried
out when 100 miles have been travelled after fitting.
Use of a motorcycle with incorrectly seated tyres or
inner tubes, incorrectly adjusted tyre pressures, or when
not accustomed to its handling characteristics may lead
to loss of motorcycle control and an accident.
Note:
• Some brands of approved tyre marked
'TU BELESS' may be suitable for use with an
inner tube. Where this is the case, the tyre
wall will be marked with text permitting the
fitment of an inner tube.
Service Manual
-
Tiger 800 and Tiger 800XC
15.9