Trinity Highway QuadGuard Elite M10 Wide Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 68

background image

TrinityHighway.com

3

Revision A August 2020

Customer Service Contacts

Trinity Highway is committed to the highest level of customer service. Feedback regarding the
QuadGuard

®

Elite M10

Wide

system, its assembly procedures, supporting documentation, and

performance is always welcome. Additional information can be obtained from the contact
information below:

Trinity Highway:

Telephone:

(888) 323-6374 (USA)
+1 312 467 6750 (International)

Contact Link

TrinityHighway.com\Contact

Important Introductory Notes

Proper assembly of the QuadGuard

®

Elite M10 Wide system

is critical to achieve performance

that has been evaluated and deemed eligible by the FHWA per AASHTO MASH criteria. These
instructions should be read in their entirety and understood before assembling the QuadGuard

®

Elite M10 Wide. These instructions are to be used in conjunction with the assembly of
QuadGuard

®

Elite M10 Wide

and are for standard assemblies only as specified by the applicable

highway authority. If you need additional information, or have questions about the QuadGuard

®

Elite M10 Wide, please contact the highway authority that has planned and specified this
assembly and, if needed, contact Trinity Highway Customer Service. This product must be
assembled in the location specified by the appropriate highway authority. If there are deviations,
alterations, or departures from the assembly protocol specified in this manual, the device may not
perform as tested.

Important:

DO NOT

use any component part that has not been specifically

approved for this system during the assembly or repair of this system.

This product has been specified for use by the appropriate highway authority and has been
provided to that user who has unique knowledge of how this system is to be assembled. No
person should be permitted to assist in the assembly, maintenance, or repair of this system that
does not possess the unique knowledge described above. These instructions are intended for an
individual qualified to both read and accurately interpret them as written. These instructions are
intended only for an individual experienced and skilled in the assembly of highway products that
are specified and selected by the highway authority.

A manufacturer’s drawing package will be supplied by Trinity Highway upon request. Each
system will be supplied with a specific drawing package unique to that system. Such drawings
take precedence over information in this manual and shall be studied thoroughly by a qualified
individual who is skilled in interpreting them before the start of any product assembly.

«
...
2
3
4
5
6
...
»

Содержание QuadGuard Elite M10 Wide





































































Отзывы:

Нет отзывов

Похожие инструкции для QuadGuard Elite M10 Wide

Precision2 HP2 Series

Бренд: B-K lighting Страницы: 6

Бренд: Zero Hand Truck Страницы: 38

Бренд: B-K lighting Страницы: 3

Бренд: Hakko Electronics Страницы: 8

Professional HS 8

Бренд: Hailo Страницы: 5

Бренд: Hainbuch Страницы: 52

Бренд: Rapala Страницы: 14

Бренд: S.R.Smith Страницы: 43

Бренд: RAMVAC Страницы: 53

Бренд: Eaton Страницы: 2

Бренд: Halemeier Страницы: 2

Бренд: IRUDEK Страницы: 19

Бренд: HABYS Страницы: 20

Бренд: Analytic Jena Страницы: 62

Бренд: Ohio Medical Страницы: 78

Бренд: S&C Страницы: 27

Бренд: Amrex Страницы: 30

Thermocenter TC40

Бренд: Salvislab Страницы: 37

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды