Trinity Highway QuadGuard Elite M10 Wide Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 68

background image

QuadGuard

®

is a registered trademark of Energy Absorption Systems, Inc.

Part No. 626821

© 2020 Trinity Highway Products, LLC

TrinityHighway.com

1

Revision A August 2020

QuadGuard

®

Elite M10 Wide [69”]

The QuadGuard

®

Elite M10 Wide

has been tested pursuant to American Association of State

Highway and Transportation Officials (“AASHTO”) Manual for Assessing Safety Hardware
(“MASH”) specifications. The QuadGuard

®

Elite M10 Wide has been deemed eligible for federal-aid

reimbursement on the National Highway System by the Federal Highway Administration (“FHWA”).

Product Description

Assembly Manual

2525 N. Stemmons Freeway

Dallas, Texas 75207

Warning:

The local highway authority, distributors, owners, contractors,

lessors, and lessees are

RESPONSIBLE

for the assembly, maintenance, and

repair of the QuadGuard

®

Elite M10

Wide

. Failure to fulfill these

RESPONSIBILITIES

with respect to the assembly, maintenance, and repair

of the QuadGuard

®

Elite M10

Wide

could result in serious injury or death.

Important:

These instructions are for standard assembly specified by the

appropriate highway authority. In the event the specified system assembly,
maintenance, or repair would require a deviation from standard assembly
parameters, contact a Trinity Highway representative. This system has been
deemed eligible by the FHWA for use on the national highway system under strict
criteria utilized by that agency.

This manual must be available to the worker overseeing and/or assembling the product at
all times. For additional copies, contact Trinity Highway directly at (888) 323-6374 or visit

TrinityHighway.com

The instructions contained in this manual supersede all previous versions. The instructions,
illustrations, and specifications are based on the latest QuadGuard

®

Elite M10

Wide

information

available to Trinity Highway at publication. We reserve the right to make changes at any time.
Please visit

TrinityHighway.com/Product/QuadGuard-Elite-M10/

to confirm the latest revision.

«
1
2
3
4
...
»

Содержание QuadGuard Elite M10 Wide





































































Отзывы:

Нет отзывов

Похожие инструкции для QuadGuard Elite M10 Wide

Бренд: Balanced Body Страницы: 4

Movie FL Black E27 Flaps

Бренд: Qazqa Страницы: 2

Бренд: Quincy lab Страницы: 4

Бренд: dbx Страницы: 2

Бренд: Eagle Group Страницы: 8

Бренд: IBEX Страницы: 4

Бренд: Quantum Страницы: 11

Бренд: Quanser Страницы: 21

Бренд: Quanser Страницы: 18

Бренд: R&S Страницы: 371

Бренд: R.M. Young Страницы: 9

Бренд: Yacht Devices Страницы: 32

Бренд: SCHUNK Страницы: 2

TEMSTM POCKET 7.3

Бренд: ASCOM Страницы: 8

Бренд: Chamberlain Страницы: 8

Бренд: LINET Страницы: 25

Бренд: MD SPORTS Страницы: 12

Бренд: SurgiVet Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды