Trinity Highway QuadGuard Elite M10 Wide, Руководство по сборке изделия

Страница: 22 / 68

TrinityHighway.com 21 Revision A August 2020
QuadGuard ® Elite M10 System Chart
Width 8 Bay - 62 mph [100 kph]
69” [1,753 mm] QM10069E
The nominal width of the
Tension Strut Backup
is the width between Side panels behind the
Backup (Figure 14). The outside width of the system is approximately 6” [152 mm] to 9” [229 mm]
wider than this measurement. The width of the system is not the same as the width of the Backup.
System Assembly
Note:
The Drawing Package supplied with the QuadGuard
®
Elite M10 Wide must be used with
these instructions for proper assembly and should take precedence over these general
instructions.
1) Determine Transition Type with Tension Strut Backup
The QuadGuard
®
Elite M10 Wide uses a Tension Strut Backup.
A Transition Panel or Side Panel must be used on each side of the Backup. A Side Panel is
not needed when a Transition Panel is used. Several types of transitions are available for use
with the QuadGuard
®
Elite M10 Wide.
Figure 14
Width of System with Tension Strut Backup
Figure 15
69” [175
3 mm]