Trinity Highway QuadGuard Elite M10 Wide Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 68

background image

TrinityHighway.com

4

Revision A August 2020

Safety Symbols

This section describes the safety symbols that appear in this QuadGuard

®

Elite M10 Wide manual.

Read the manual for complete safety and assembly information.

Symbol

Meaning

Safety Alert Symbol:

Indicates Important, Caution, Warning, or Danger. Failure

to read and follow the Important, Caution, Warning, or Danger indicators could
result in serious injury or death to workers and/or bystanders.

Warning:

Read safety instructions thoroughly and follow the assembly directions

and suggested safe practices before assembling, maintaining, or repairing the
QuadGuard

®

Elite M10 Wide. It is the responsibility of the installer to follow the

instructions contained in this manual. Failure to comply with these warnings could
result in increased risk of serious injury of death in the event of a vehicle impact.

Important:

Please keep up-to-date instructions for later use and reference by

anyone involved in the assembly of the product.

Safety Rules for Assembly

* Important Safety Instructions *

This manual must be kept in a location where it is readily available to persons who are skilled and
experienced in the assembly, maintenance, or repair of the QuadGuard

®

Elite M10 Wide.

Additional copies of this manual are available from Trinity Highway by calling (888) 323-6374 or
by visiting

TrinityHighway.com/Product/QuadGuard-Elite-M10/

. Please contact Trinity Highway if

you have any questions concerning the information in this manual or about the QuadGuard

®

Elite

M10 Wide.

Warning:

It is the responsibility of the installer to use appropriate safety

precautions when operating power equipment, mixing chemicals, and when
moving heavy equipment or QuadGuard

®

M10 Wide components. Safety articles

including but not necessarily limited to work gloves, eye protection, safety-toe
shoes, and back protection should be used.

Warning:

It is the responsibility of the installer to use all safety measures

incorporating appropriate traffic control devices specified by the highway authority.
These measures must be used to protect all personnel while at the assembly,
maintenance, or repair site.

Warning:

Use only Trinity Highway parts on the QuadGuard

®

Elite M10 Wide for

assembly, maintenance, or repair. The use of component parts not specified herein
is

strictly prohibited

. The QuadGuard

®

Elite M10 Wide assembled with Trinity

Highway parts has been tested, approved, and accepted for state use by the
FHWA. A QuadGuard

®

Elite M10 Wide Assembly using parts other than those

specified herein has not been tested, approved, or accepted for state use by the
FHWA. Failure to follow this warning could result in increased risk of serious injury
or death in the event of a vehicle impact.

«
...
3
4
5
6
7
...
»

Содержание QuadGuard Elite M10 Wide





































































Отзывы:

Нет отзывов

Похожие инструкции для QuadGuard Elite M10 Wide

Бренд: ABB Страницы: 50

ACS880-01 Series

Бренд: ABB Страницы: 17

Бренд: ABB Страницы: 36

Бренд: Keithley Страницы: 32

Бренд: jcb Страницы: 166

Бренд: Parker Страницы: 5

Бренд: Bacharach Страницы: 31

Бренд: Bacharach Страницы: 2

Бренд: Eaton Страницы: 21

Бренд: Eaton Страницы: 70

Бренд: NANO Страницы: 4

Бренд: Major Страницы: 52

Бренд: Radial Engineering Страницы: 2

Бренд: Radial Engineering Страницы: 2

Бренд: VARISCO Страницы: 24

Бренд: Vari Lite Страницы: 14

Бренд: Vaniman Страницы: 3

Бренд: Gardco Страницы: 17

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды